Turn off the Lights

Turn on the Savings with Con Edisons Energy Savings Programs. by Courtney C. Capshaw, Lockheed Martin Member of the Con Edison Green Team Did you know lighting consumes up to 40% of a commercial facilitys electricity? The heat output from lights also impacts cooling loads. The following four options can help reduce lighting costs. Turn Off the Lights This sounds very basic but turning off the lights is an easy, energy-saving practice that can produce substantial cost savings benefits. And remember; switching to compact fluorescent light bulbs (CFLs) will save about 75 percent of your lighting costs, and even more when you remember to turn them off. Use Occupancy Sensors Occupancy Sensors are an effective method of reducing lighting costs in almost every space where people move in and out in unpredictable patterns (e.g. offices, restrooms, warehouses and conference rooms). In fact, a study conducted by the Lighting Research Center, An Analysis of the Energy and Cost Savings Potential of Occupancy Sensors for Commercial Lighting, showed a 43% energy savings when occupancy sensors were installed in private offices. Con Edison provides a $50 rebate per installed sensor (minimum 100 watts controlled). Take Advantage of Natural Daylight The concept of Daylight Harvesting is simple: when sufficient daylight is available, an easy to install daylight sensor will automatically dim or turn off the lights. A daylight sensor will continually monitor the lighting level and make adjustments to the electric lighting based on a pre-set target. Not only can you save energy by dimming or turning lights off, studies such as the U.S. Department of Energy Greening the Building and the Bottom Line: Increasing Productivity Through Energy-Efficient Design show increased productivity when employees have access to natural daylight or views outside. Earn $60 per sensor (minimum 75 watts controlled) from Con Edison when you install remote mounted daylight dimming controls, or $30 per sensor (minimum 45 watts controlled) for fixture-mounted daylight dimming controls. Integrate Lighting Control into Your Facility Lighting control panels can be installed next to a buildings electrical panel or near the lighting load the panel is controlling. The lighting control panel controls a group of light fixtures by sending a signal to turn the lights on/off at pre-programmed times. You can program the panels remotely or have the factory program them prior to shipment. Another benefit to using control panels is that they can be used in conjunction with the daylight harvesting and occupancy sensor techniques outlined above. Lighting control panels are easily adaptable into existing facilities and can provide you with automated lighting controls for a minimal cost while providing substantial energy savings. Many lighting control projects qualify for incentives under the Custom Incentive Program. An energy assessment is needed to fully provide the right course of action. Con Edison offers cash rebates and incentives for the installation of lighting and lighting control upgrades to commercial and industrial customers in New York City and Westchester County through our Commercial & Industrial (C&I) Energy Efficiency Programs. To learn more about Con Edisons C&I Energy Efficiency Program, visit conEd.com/energysavings or call an energy efficiency representative at 1-877-797-6347.

Read the original here:
Turn off the Lights

Earn Cash for Energy Efficiency Upgrades from Con Edison

Share by Courtney C. Capshaw, Lockheed Martin Member of the Con Edison Green Team Office buildings consume more energy than any other building type, according to the U.S Energy Information Administration. These buildings use 198 billion kWh of electricity each year, equivalent to the amount of electricity consumed by 18 million American homes annually. The cost of this energy usage is on average $1.51 per square foot in office buildings nationwide. That number is closer to $2.50 per square foot in New York City, where buildings consume almost 80% of all energy. Con Edisons Commercial and Industrial (C&I) Energy Efficiency Program can help to reduce energy consumption in office buildings. This program provides C&I customers cash rebates and incentives for implementing energy efficient solutions and installing energy efficient equipment upgrades. Available for both gas and electric projects, these energy efficiency upgrades can help improve your companys bottom line by reducing energy usage and maintenance costs while increasing operating efficiencies. Con Edison anticipates these cash rebates and incentives will encourage the completion of energy efficiency projects in the Companys service area, which includes New York City and Westchester County. With rebates and incentives available for both gas and electric, the program offers a variety of participation options. Since the launch of the C&I Program last summer, weve received over 1000 project applications, accounting for nearly 67,000,000 kilowatt hours and 512,000 therms savings and almost $ 6,500,000 in rebates and incentives for our commercial and industrial customers. Con Edison is committed to providing our customers with the resources they need to lower their energy usage and we encourage more customers to take advantage of these financial incentives, stated David Pospisil, Con Edison C&I Program Manager. Saving money, energy and the environment are simple reasons to participate in Con Edisons C&I Energy Efficiency Program. More specifically, the program provides cash incentives to reduce the cost of your capital investment – a welcome benefit in todays current economic environment. The program also provides customers with a network of approved energy efficiency contractors, distributors, and other energy professionals for your efficient upgrade projects. The program team is robust, ready and willing to support you on your path to a more efficient future. You can learn more about the Con Edison C&I Energy Efficiency Program by visiting their Web site at conEd.com/energysavings or by calling toll-free 1-877-797-6347. If you want to know more about energy efficiency , you may click on the resources to lead you to more information. You may also use the search box to further lead you to other articles. If you want to contribute to this website, we would love to hear your suggestions! It would be great to have you share your thoughts about energy efficiency . Feel free to send an email to us.

View post:
Earn Cash for Energy Efficiency Upgrades from Con Edison

The Applicability On The Earth4Energy Review

A solar powered system for under $100 could easily be seen as a valid investment. This is what Earth4Energy has promised in their product distribution. The Earth4Energy Reviews in this instance is very positive. This is so simply because your commercial solar powered systems would cost you between $5,000 and $10,000 to install. Others have

Go here to see the original:
The Applicability On The Earth4Energy Review

Home Wind Generators – Get To Know How To Generate Energy Using a Home Wind Turbine

It is interesting to discover how you can generate free electricity as you can save a whole lot on electrical expenses. Let us look into a couple of great environmentally friendly ways to make electricity with the use of a home wind turbine. You can choose to install this system into your home or even

Go here to see the original:
Home Wind Generators Get To Know How To Generate Energy Using a Home Wind Turbine

City Utilities End Coal Fired Electricity Contracts in California

In what is hopefully the start of a new trend, several Southern California cities have decided not to renew long-term contracts for coal-fired electricity, choosing instead to turn to cleaner sources of electricity. City officials told Utah-based Intermountain Power Agency they wouldn’t be renewing their contracts for coal-fired power, which expire in 2027, and would instead be looking for alternative energy sources. “It’s a huge change,” said Mayor Todd Campbell of Burbank, one of the cities that decided not to renew its contract. The cities are Pasadena , Glendale , Riverside and Anaheim . They join the Los Angeles Department of Water and Power , which has already choosen not to renew the contract with Intermountain. Currently coal fired electricity makes up a significant percentage of their power, for example Pasadena Water & Power says that the Intermountain plant is 65 percent of our energy. Intermountain’s general manager Reed Searle said the company had worked for three years on the renewals and was now looking at ways to modernize its plants to bring them into compliance with California’s greenhouse gas legislation that takes effect on the first of January. The cities’ decision came after increased pressure from politicians and environmentalists. Senator Dianne Feinstein wrote a letter to an umbrella group for the cities last week saying she was “shocked and dismayed” by an initial decision last month by Burbank to renew the contract. Phyllis Currie, general manager of Pasadena Water & Power said the utilities wanted to explain how important Intermountain was to California cities. “It’s a serious issue when you tell us to walk away from that,” she said. The move could put Southern California in the forefront nationally of the commercial use of alternative energy in coming years. Intermountain has extended its renewal offer for power from the plants until 2023 from the previous deadline of May 2007 in the hope state regulators will let utility officials renew the contracts if greenhouse gases are reduced. Electricity utilities are starting to feel the pressure for “clean” coal .

Read more from the original source:
City Utilities End Coal Fired Electricity Contracts in California